```
How to Install and Activate Autocom 2013 Release 1 Software
Autocom is a diagnostic software that can be used with various interfaces, such as CDP, CDP+, DS150 and DS150e. It supports cars and trucks from different manufacturers and offers various functions, such as reading and erasing fault codes, live data, actuator tests, service reset and more.
In this article, we will show you how to install and activate Autocom 2013 Release 1 software on your computer. This version of Autocom is compatible with Windows XP, Vista and 7 operating systems. You will need a .rar file that contains the software installation files, the patch files and the keygen. You can download this file from here or from other sources.
Step 1: Install Autocom 2013 Release 1 Software
Before you install the software, make sure you have turned off your antivirus program and disconnected your internet connection. Then follow these steps:
Autocom 2013 Release 1 .rar
Download Zip: https://bltlly.com/2tH5k2
Extract the .rar file to a folder on your computer.
Run the file CDP2013R1.exe as administrator.
Select the language and click OK.
Accept the license agreement and click Next.
Select the installation folder and click Next.
Select the interface type (CDP or DS150) and click Next.
Select the installation type (Cars or Trucks) and click Next.
Wait for the installation to complete and click Finish.
Step 2: Patch Autocom 2013 Release 1 Software
After you have installed the software, you need to patch it to bypass the activation process. To do this, follow these steps:
Go to the folder where you extracted the .rar file and open the folder Activator 2013.1.
Copy all the files in this folder and paste them to the installation folder (C:\\\\Program Files\\\\Autocom or C:\\\\Program Files\\\\Delphi by default).
Replace the existing files when prompted.
Run the file Main.exe as administrator.
Select Cars or Trucks depending on your installation type and click Start.
Wait for the patching process to finish and close the program.
Step 3: Generate Hardware Key and Activate Autocom 2013 Release 1 Software
The final step is to generate a hardware key based on your interface serial number and activate the software using the keygen. To do this, follow these steps:
Go to the folder where you extracted the .rar file and open the folder Autocom_Delphi Serial HW Keygen 2013.1.
Run the file Keygen.exe as administrator.
Select Cars or Trucks depending on your installation type and enter your interface serial number in the box below (for example, a-710-479 for CDP Cars).
Click Generate HW Key button and copy the hardware key that appears in the box below.
Run the Autocom software from your desktop shortcut or start menu.
Select Activate via USB and click Next.
Paste the hardware key that you copied in step 4 in the box below and click Next.
A message will appear saying that your activation was successful. Click Finish.
Congratulations! You have successfully installed and activated Autocom 2013 Release 1 software. You can now connect your interface to your computer and start diagnosing vehicles. Enjoy!
``` 0efd9a6b88
https://www.bicytp.com/group/questions-and-answers/discussion/2613a644-5327-46c9-989d-2f46a1793fd9